Original file

Fiat Doblo Bosch EDC17CP52 0281016888 / 506389

An original (stock) flash read of the Bosch EDC17CP52 control unit, fitted in Fiat Doblo, hardware number 0281016888 and software number 506389, 3,072.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Doblodiesel
Control unit
Bosch EDC17CP52
Read type
Full read (boot area included)
File
3,072.00 KB · Flash
Hardware number
0281016888
Software number
506389
Bosch part / software
1037506389
Vehicle maker's hardware number
51888308
Software / calibration
P_845_EDC17CP52_V2A0

Technical data

Vehicle
BrandFiat
Car modelDoblo
Enginediesel
Displacement3.0
Control unit
Control unitBosch EDC17CP52
ECU makerBosch
Hardware number0281016888
Software number506389
File
File typeOriginal flash read
File size3,072.00 KB (3,145,728 bytes)
From the file nameFiat EDC17CP52 SW version O40JTD40
File key9689f5da254f2744
Identification read from the file
ECU nameEDC17CP52
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037506389Offset in the file: 0x27836B
Vehicle maker's hardware number51888308Offset in the file: 0x278379
Software / calibrationP_845_EDC17CP52_V2A0Offset in the file: 0x0357AC
Internal build string11B.04.01.01RBOffset in the file: 0x00BC64
Bosch project identifier (EPK)52/1/EDC17CP52_C1/242/P_845//P_845_EDC17CP52_V2A0///Offset in the file: 0x0357AC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP52 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016888 and software number 506389. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP52

HardwareSoftwareVehicles
02544808401037546164Mitsubishi Canter
02810168161037506085Fiat ducato 3.0lL
02810168161037506388Fiat DUCATO
02810168881037506389Fiat Ducato, Fiat Jumper, Citroën
02810182901037516217Fiat Ducato
02810182911037516219Fiat Ducato, Fiat Ducato III
02810182911037517602Fiat Ducato, Fiat Jumper, Fiat Boxer 3.0 HDI FAP
02810182911037519566Fiat Ducato, Fiat Boxer, Fiat Doblo

Bosch EDC17CP52 original files

The Bosch EDC17CP52 unit page