Original file

Iveco Daily Bosch EDC17CP52 C107350W5LN0A6EI0I772P01 / 5801467201

An original (stock) flash read of the Bosch EDC17CP52 control unit, fitted in Iveco Daily, hardware number C107350W5LN0A6EI0I772P01 and software number 5801467201, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Iveco Daily3.0 diesel · 145.0PS / 106.6kW
Control unit
Bosch EDC17CP52
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
C107350W5LN0A6EI0I772P01
Software number
5801467201
Software / calibration
P_591_EDC17CP52_772

Technical data

Vehicle
BrandIveco
Car modelDaily
Engine3.0 diesel
Power145.0PS / 106.6kW
Control unit
Control unitBosch EDC17CP52
ECU makerBosch
Hardware numberC107350W5LN0A6EI0I772P01
Software number5801467201
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7e5111fe5b4e01e7
Identification read from the file
ECU nameEDC17CP52
Read typeCalibration only (data set)
Software / calibrationP_591_EDC17CP52_772Offset in the file: 0x000A10
Bosch project identifier (EPK)51/1/EDC17CP52_C1/242/P_591//P_591_EDC17CP52_772///Offset in the file: 0x000A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP52 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number C107350W5LN0A6EI0I772P01 and software number 5801467201. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP52

Bosch EDC17CP52 original files

The Bosch EDC17CP52 unit page