Original file

Audi A6 Bosch EDC17CP54 0281031729 / 10SW044552

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi A6, hardware number 0281031729 and software number 10SW044552, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel 200KW
Control unit
Bosch EDC17CP54
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031729
Software number
10SW044552
Vehicle maker's hardware number
4G2907401
Software / calibration
4G2907401B

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel 200KW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number0281031729
Software number10SW044552
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A6 3.0 TDI 200KW
File key32d5645df419ed4f
Identification read from the file
ECU nameEDC17CP54
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW044552Offset in the file: 0x02001A
Vehicle maker's hardware number4G2907401Offset in the file: 0x2C8C16
Software / calibration4G2907401B · version 0007Offset in the file: 0x2C8C30
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)37/1/EDC17_CP54/5/P1304//C1304CNFE///Offset in the file: 0x04FC64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031729 and software number 10SW044552. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
Audi A7Audi A7
059907309BAudi
059907309B000888Audi Q7 3.0 TDI CR, Audi Q7 3.0 TDI
059907309B001731Audi Q7 3.0TDI
059907309B003296Audi Q7 3.0
059907309B007393Audi A7 3.0 TDI CR DPF, Audi Q7 3.0 Tdi
059907309B007446Audi Q7 3.0 TDI CR
059907309B051770Audi Q7 3.0 TDI

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page