Original file

Audi Q7 3.0 TDI CR Bosch EDC17CP54 059907309B / 007446

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi Q7 3.0 TDI CR, hardware number 059907309B and software number 007446, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q7 3.0 TDI CR3.0 diesel 272.0PS / 200.1kW
Control unit
Bosch EDC17CP54
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
059907309B
Software number
007446
Bosch part / software
10SW007446
Software / calibration
4M0907401

Technical data

Vehicle
BrandAudi
Car modelQ7 3.0 TDI CR
Engine3.0 diesel 272.0PS / 200.1kW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number059907309B
Software number007446
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9e19b430660a5e43
Identification read from the file
ECU nameEDC17CP54
Read typeCalibration only (data set)
Bosch part / software10SW007446Offset in the file: 0x0C001A
Vehicle maker's hardware number059907309BOffset in the file: 0x0CA04A
Software / calibration4M0907401 · version 0005Offset in the file: 0x0CA064
Bosch project identifier (EPK)937/1/EDC17_CP54/5/P1160//C1160QOL7///Offset in the file: 0x0C007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 059907309B and software number 007446. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
059907309B000888Audi Q7 3.0 TDI CR, Audi Q7 3.0 TDI
059907309B001731Audi Q7 3.0TDI
059907309B003296Audi Q7 3.0
059907309B007393Audi A7 3.0 TDI CR DPF, Audi Q7 3.0 Tdi
059907309B051770Audi Q7 3.0 TDI
059907309B059907309BAudi Q7, Audi A7, Audi 4M
059907309B060097Audi Q7 3.0 Tdi
059907309B1037545026Audi Q7, Audi 3.0 TDI, Audi Q7 3.0 TDI

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page