Original file

Volkswagen pcmflash Bosch EDC17CP54 2H6907311H / 10SW023661

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Volkswagen pcmflash, hardware number 2H6907311H and software number 10SW023661, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash3.0 diesel 224PS
Control unit
Bosch EDC17CP54
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
2H6907311H
Software number
10SW023661
Vehicle maker's hardware number
059907309J

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine3.0 diesel 224PS
Power224PS / 164.8kW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number2H6907311H
Software number10SW023661
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key5fa471faa57a0eff
Identification read from the file
ECU nameEDC17CP54
Read typeFull read (boot area included)
Bosch part / software10SW023661Offset in the file: 0x02001A
Vehicle maker's hardware number059907309JOffset in the file: 0x2C99BA
Software / calibration2H6907311H · version 0003Offset in the file: 0x2C99D4
Bosch project identifier (EPK)37/1/EDC17_CP54/5/P1556//C1556APE5///Offset in the file: 0x050670

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2H6907311H and software number 10SW023661. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
2H6907311AC10SW068953Volkswagen Amarok
2H6907311B10SW020261Volkswagen pcmflash
2H6907311D10SW025050Volkswagen pcmflash
2H6907311E059907309JVolkswagen pcmflash
4G2907311C009134Audi A6 3.0 TDI
4G2907311C046131Audi A6 3.0 TDI Clean Diesel (218) S-Tronic - 218hp, Audi A7, Audi G290
4G2907311C1037544263Audi A7
4G2907311C1037545026Audi A6

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page