Original file

Audi A7 Bosch EDC17CP54 4G2907311C / 1037544263

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi A7, hardware number 4G2907311C and software number 1037544263, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A73.0 diesel 271PS
Control unit
Bosch EDC17CP54
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G2907311C
Software number
1037544263
Bosch part / software
10SW046131
Vehicle maker's hardware number
4G2907401

Technical data

Vehicle
BrandAudi
Car modelA7
Engine3.0 diesel 271PS
Power271.9PS / 200.0kW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number4G2907311C
Software number1037544263
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key414f9d8f40c84ed1
Identification read from the file
ECU nameEDC17CP54
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW046131Offset in the file: 0x02001A
Vehicle maker's hardware number4G2907401Offset in the file: 0x2C8C16
Software / calibration4G2907311C · version 0007Offset in the file: 0x2C8C30
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)37/1/EDC17_CP54/5/P1304//C1304CNFE///Offset in the file: 0x04FC64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G2907311C and software number 1037544263. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
2H6907311E059907309JVolkswagen pcmflash
2H6907311H10SW023661Volkswagen pcmflash
4G2907311C009134Audi A6 3.0 TDI
4G2907311C046131Audi A6 3.0 TDI Clean Diesel (218) S-Tronic - 218hp, Audi A7, Audi G290
4G2907311C1037545026Audi A6
4G2907311C1037545842Audi A6, Audi A6 3.0 TDI CR DPF, Audi pcmflash
4G2907311C1037556883Audi A6, Audi A6 3.0 TDI, Audi A7 3.0 TDI CR DPF
4G2907311C10SW009134Audi A6, Audi pcmflash

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page