Original file

Audi A6 Bosch EDC17CP54 4G2907311C / 10SW009134

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi A6, hardware number 4G2907311C and software number 10SW009134, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel 270PS
Control unit
Bosch EDC17CP54
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4G2907311C
Software number
10SW009134
Vehicle maker's hardware number
4G2907401

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel 270PS
Power270.0PS / 198.6kW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number4G2907311C
Software number10SW009134
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyeaa3b77c44cb6496
Identification read from the file
ECU nameEDC17CP54
Read typeCalibration only (data set)
Bosch part / software10SW009134Offset in the file: 0x2C001A
Vehicle maker's hardware number4G2907401Offset in the file: 0x2C8C16
Software / calibration4G2907311C · version 0003Offset in the file: 0x2C8C30
Bosch project identifier (EPK)437/1/EDC17_CP54/5/P1304//C1304CNFE///Offset in the file: 0x2C007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G2907311C and software number 10SW009134. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash2,048.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi pcmflashFlash8,192.00 KB€15Add to cart

All reads of 4G2907311C / 10SW009134

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
4G2907311C1037544263Audi A7
4G2907311C1037545026Audi A6
4G2907311C1037545842Audi A6, Audi A6 3.0 TDI CR DPF, Audi pcmflash
4G2907311C1037556883Audi A6, Audi A6 3.0 TDI, Audi A7 3.0 TDI CR DPF
4G2907311C10SW009134 1304CNFEAudi A6 3.0 TDI CR DPF
4G2907311C10SW046131Audi A6, Audi pcmflash, Audi A7
4G2907311C4G2907311CAudi A6
4G2907311C4G2907401Audi A6

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page