Original file

Audi A7 3.0TDI Bosch EDC17CP54 4G2907401 / 1037556883

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi A7 3.0TDI, hardware number 4G2907401 and software number 1037556883, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A7 3.0TDI3.0 diesel
Control unit
Bosch EDC17CP54
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G2907401
Software number
1037556883
Software / calibration
4G2907311C

Technical data

Vehicle
BrandAudi
Car modelA7 3.0TDI
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number4G2907401
Software number1037556883
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A7 EDC17CP54
File keyf7268bc15bbc8f85
Identification read from the file
ECU nameEDC17CP54
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037556883Offset in the file: 0x02001A
Vehicle maker's hardware number4G2907401Offset in the file: 0x2C8C16
Software / calibration4G2907311C · version 0007Offset in the file: 0x2C8C30
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)37/1/EDC17_CP54/5/P1304//C1304CNFE///Offset in the file: 0x04FC64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G2907401 and software number 1037556883. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
4G2907311E10SW009268 1304CNFEAudi A6 3.0 TDI CR DPF
4G2907311E10SW044948Audi pcmflash
4G29074011037545725Audi A7
4G29074011037545836Audi A6 272 BHP
4G2907401B009020Audi A6 3.0 TDI, Audi A6, Audi A6 -
4G2907401B044552Audi A6 3.0 TDI, Audi A4 3.0 TDI, Audi A6 3.0 TDI Clean Diesel (272) Quattro S-Tronic - 272hp
4G2907401B1037545026Audi A6
4G2907401B1037545836Audi A6, Audi A7, Audi A6 3.0 TDI

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page