Original file

Audi A6 Bosch EDC17CP54 4G2907401B / 4G2907401B

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi A6, hardware number 4G2907401B and software number 4G2907401B, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel · 272.1PS / 200.1kW
Control unit
Bosch EDC17CP54
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
4G2907401B
Software number
4G2907401B
Bosch part / software
10SW044552
Vehicle maker's hardware number
4G2907401

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel
Power272.1PS / 200.1kW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number4G2907401B
Software number4G2907401B
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key8b354d40d3592347
Identification read from the file
ECU nameEDC17CP54
Read typeFull read (boot area included)
Bosch part / software10SW044552Offset in the file: 0x02001A
Vehicle maker's hardware number4G2907401Offset in the file: 0x2C8C16
Software / calibration4G2907401B · version 0007Offset in the file: 0x2C8C30
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x217E50
Bosch project identifier (EPK)37/1/EDC17_CP54/5/P1304//C1304CNFE///Offset in the file: 0x04FC64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G2907401B and software number 4G2907401B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
4G2907401B1037556795Audi A6, Audi A6 3.0 TDI CR DPF, Audi A6 3.0 TDI
4G2907401B10SW009020Audi A6, Audi pcmflash
4G2907401B10SW044552Audi A6, Audi G290, Audi A7
4G2907401B10SW044552 1304NNFEAudi A6 3.0 TDI
4G2907401C1037555844Audi A6 3.0 TDI, Audi pcmflash, Audi A6
4G2907401C10SW008995Audi pcmflash
4G2907401C10SW008995 1304CNFEAudi A6 3.0 TDI CR DPF
4G2907401C10SW044937Audi pcmflash

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page