Original file

Audi pcmflash Bosch EDC17CP54 4G2907401C / 10SW044937

An original (stock) flash read of the Bosch EDC17CP54 control unit, fitted in Audi pcmflash, hardware number 4G2907401C and software number 10SW044937, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash3.0 diesel 271PS
Control unit
Bosch EDC17CP54
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
4G2907401C
Software number
10SW044937
Vehicle maker's hardware number
4G2907401

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine3.0 diesel 271PS
Power271.9PS / 200.0kW
Control unit
Control unitBosch EDC17CP54
ECU makerBosch
Hardware number4G2907401C
Software number10SW044937
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key67da554d85ec46ee
Identification read from the file
ECU nameEDC17CP54
Read typeFull read (boot area included)
Bosch part / software10SW044937Offset in the file: 0x02001A
Vehicle maker's hardware number4G2907401Offset in the file: 0x2C8C16
Software / calibration4G2907401C · version 0007Offset in the file: 0x2C8C30
Bosch project identifier (EPK)37/1/EDC17_CP54/5/P1304//C1304CNFE///Offset in the file: 0x04FC64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G2907401C and software number 10SW044937. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP54

HardwareSoftwareVehicles
4G2907401B4G2907401BAudi A6
4G2907401C1037555844Audi A6 3.0 TDI, Audi pcmflash, Audi A6
4G2907401C10SW008995Audi pcmflash
4G2907401C10SW008995 1304CNFEAudi A6 3.0 TDI CR DPF
4M090740110SW000888Audi pcmflash
4M090740110SW007446Audi pcmflash
4M090740110SW018739Audi pcmflash
4M0907401E10SW007083Audi pcmflash

Bosch EDC17CP54 original files

The Bosch EDC17CP54 unit page