Original file

Land Rover Range Rover Sport 3.0 TDV6 Bosch EDC17CP55 GK62-12K532-PPD / L494_LV6_Mono_190kW_D1_Y235_16MY_JC99_EU6_R06-1

An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Range Rover Sport 3.0 TDV6, hardware number GK62-12K532-PPD and software number L494_LV6_Mono_190kW_D1_Y235_16MY_JC99_EU6_R06-1, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Sport 3.0 TDV63.0 diesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP55
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GK62-12K532-PPD
Software number
L494_LV6_Mono_190kW_D1_Y235_16MY_JC99_EU6_R06-1
Bosch part / software
10SW004025
Software / calibration
GW93-14C204-PAC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Sport 3.0 TDV6
Engine3.0 diesel 258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP55
ECU makerBosch
Hardware numberGK62-12K532-PPD
Software numberL494_LV6_Mono_190kW_D1_Y235_16MY_JC99_EU6_R06-1
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyde99eea9287f01c8
Identification read from the file
ECU nameEDC17CP55
Read typeCalibration only (data set)
Bosch part / software10SW004025Offset in the file: 0x02001A
Software / calibrationGW93-14C204-PACOffset in the file: 0x12457F
Bosch project identifier (EPK)39/1/EDC17CP55/190/P1163//P1163_Y235///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GK62-12K532-PPD and software number L494_LV6_Mono_190kW_D1_Y235_16MY_JC99_EU6_R06-1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP55

HardwareSoftwareVehicles
GK62-12K532-PFE10SW005235Land Rover Range Rover
GK62-12K532-PFE10SW005235 1163Y235Land Rover Range Rover 3.0 SDV6
GK62-12K532-PHF10SW012073Land Rover Range Rover
GK62-12K532-PPCGW93-14C204-PACLand Rover Range Rover Sport
GK62-12K532-PPEGW93-14C204-PACLand Rover Range Rover 3.0 TDV6
GK62-12K532-PPFGW93-14C204-PACLand Rover Range Rover Sport
GK62-12K532-PPGGK62-12K532-PDGLand Rover Range Rover Sport
GK62-12K532-PPH10SW020999Land Rover Range Rover

Bosch EDC17CP55 original files

The Bosch EDC17CP55 unit page