Original file

Land Rover Range Rover Bosch EDC17CP55 GPLA-12K532-NCC / GPLA-14C204-NAC

An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Range Rover, hardware number GPLA-12K532-NCC and software number GPLA-14C204-NAC, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover4.4 · 340.0PS / 250.1kW
Control unit
Bosch EDC17CP55
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GPLA-12K532-NCC
Software number
GPLA-14C204-NAC
Bosch part / software
10SW001847

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine4.4
FuelDiesel
Power340.0PS / 250.1kW
Control unit
Control unitBosch EDC17CP55
ECU makerBosch
Hardware numberGPLA-12K532-NCC
Software numberGPLA-14C204-NAC
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key55025ea25c0144bd
Identification read from the file
ECU nameEDC17CP55
Read typeCalibration only (data set)
Bosch part / software10SW001847Offset in the file: 0x02001A
Software / calibrationGPLA-14C204-NACOffset in the file: 0x12457F
Bosch project identifier (EPK)39/1/EDC17CP55/190/P1163//P1163_Y235///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GPLA-12K532-NCC and software number GPLA-14C204-NAC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP55

HardwareSoftwareVehicles
GK62-12K532-PRL10SW026364Land Rover Range Rover
GPLA-12K532-HBD10SW001770Land Rover Range Rover
GPLA-12K532-HBF10SW005395Land Rover Range Rover Sport
GPLA-12K532-NBD10SW011885Land Rover Range Rover
GPLA-12K532-NCD10SW000184Land Rover Altaltalt
GPLA-12K532-NCD10SW005733Land Rover
GPLA-12K532-NCE10SW007128Land Rover Range Rover
GPLA-12K532-NCEGPLA-14C204-NACLand Rover Range Rover

Bosch EDC17CP55 original files

The Bosch EDC17CP55 unit page