Original file

Land Rover Range Rover Bosch EDC17CP55 GPLA-12K532-NRC / 10SW001762

An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Range Rover, hardware number GPLA-12K532-NRC and software number 10SW001762, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover4.4 diesel 340PS
Control unit
Bosch EDC17CP55
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GPLA-12K532-NRC
Software number
10SW001762
Software / calibration
GPLA-14C204-NAC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine4.4 diesel 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch EDC17CP55
ECU makerBosch
Hardware numberGPLA-12K532-NRC
Software number10SW001762
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key116ec086e2a3c901
Identification read from the file
ECU nameEDC17CP55
Read typeCalibration only (data set)
Bosch part / software10SW001762Offset in the file: 0x02001A
Software / calibrationGPLA-14C204-NACOffset in the file: 0x12457F
Bosch project identifier (EPK)39/1/EDC17CP55/190/P1163//P1163_Y235///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GPLA-12K532-NRC and software number 10SW001762. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP55

HardwareSoftwareVehicles
GPLA-12K532-NCEGPLA-14C204-NACLand Rover Range Rover
GPLA-12K532-NCFGPLA-14C204-NADLand Rover Range Rover
GPLA-12K532-NCHGPLA-14C204-NADLand Rover Range Rover
GPLA-12K532-NCJGPLA-14C204-NADLand Rover Range Rover
GPLA-12K532-NRD10SW011883Land Rover Range Rover Sport
GPLA-12K532-NRF10SW048830Land Rover
GPLA-14C204-NAC10SW000184Land Rover Range Rover
GPLA-14C204-NACGPLA-14C204-NACLand Rover Range Rover

Bosch EDC17CP55 original files

The Bosch EDC17CP55 unit page