Original file

Land Rover Discovery Bosch EDC17CP55 GPLA-14C204-PAB / 10SW000181

An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Discovery, hardware number GPLA-14C204-PAB and software number 10SW000181, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Discovery3.0 diesel 220PS
Control unit
Bosch EDC17CP55
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
GPLA-14C204-PAB
Software number
10SW000181
Bosch part / software
10SW010845
Software / calibration
FW93-12B684-PAC

Technical data

Vehicle
BrandLand Rover
Car modelDiscovery
Engine3.0 diesel 220PS
Power220.3PS / 162kW
Control unit
Control unitBosch EDC17CP55
ECU makerBosch
Hardware numberGPLA-14C204-PAB
Software number10SW000181
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye4fc0ebe9f42e2eb
Identification read from the file
ECU nameEDC17CP55
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW010845Offset in the file: 0x02001A
Software / calibrationFW93-12B684-PACOffset in the file: 0x00FD00
Engine descriptionGPLA-14C204-PABOffset in the file: 0x1FFF02
Bosch project identifier (EPK)39/1/EDC17CP55/190/P1163//P1163_Y242///Offset in the file: 0x03F434

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GPLA-14C204-PAB and software number 10SW000181. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover Range Rover SportFlash4,096.00 KB€15Add to cart
Land Rover Range RoverFlash4,096.00 KB€15Add to cart
Land Rover Range RoverFlash4,096.00 KB€15Add to cart
Jaguar XFFlash4,096.00 KB€15Add to cart

All reads of GPLA-14C204-PAB / 10SW000181

Other pairs of Bosch EDC17CP55

HardwareSoftwareVehicles
GPLA-14C204-NACL405_16_3-20_360_EU6_250_C_8A4Land Rover Range Rover 4.4 SDV8
GPLA-14C204-NAD10SW000184Land Rover Range Rover, Land Rover Range Rover Sport, Rover
GPLA-14C204-NAD10SW010846
GPLA-14C204-PAA10SW003590Jaguar X761
GPLA-14C204-PAB10SW003590Jaguar F-Pace, Jaguar Range Rover, Jaguar F-PACE (X761)
GPLA-14C204-PAB10SW010845Land Rover Range Rover, Land Rover F-Pace, Land Rover F-Type
GPLA-14C204-PABFW93-14C273-PYBJaguar F-Pace
GPLA-14C204-PABGPLA-14C204-PABJaguar F-Type, Jaguar XF, Jaguar F-Pace

Bosch EDC17CP55 original files

The Bosch EDC17CP55 unit page