Original file

Land Rover Range Rover Bosch EDC17CP55 HPLA-12K532-PJE / HPLA-12K532-PHE

An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Range Rover, hardware number HPLA-12K532-PJE and software number HPLA-12K532-PHE, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover3.0 · 258.0PS / 189.8kW
Control unit
Bosch EDC17CP55
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
HPLA-12K532-PJE
Software number
HPLA-12K532-PHE
Bosch part / software
10SW020061
Software / calibration
HY32-14C204-PAC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine3.0
FuelDiesel
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP55
ECU makerBosch
Hardware numberHPLA-12K532-PJE
Software numberHPLA-12K532-PHE
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key70771225796abaa5
Identification read from the file
ECU nameEDC17CP55
Read typeCalibration only (data set)
Bosch part / software10SW020061Offset in the file: 0x02001A
Software / calibrationHY32-14C204-PACOffset in the file: 0x12A611
Bosch project identifier (EPK)39/1/EDC17CP55/190/P1525//P1525_Y342///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HPLA-12K532-PJE and software number HPLA-12K532-PHE. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP55

HardwareSoftwareVehicles
HK83-12K532-PCH10SW030086Jaguar F-Pace
HK83-12K532-PCH10SW030086 1163Y242Jaguar F-Pace 30d
HK83-12K532-PHFGPLA-14C204-PAAJaguar F-Pace
HPLA-12K532-PGH10SW053983Land Rover Range Rover
HPLA-12K532-PJFHPLA-12K532-PJFLand Rover Range Rover Sport
HPLA-12K532-PJG10SW042900Land Rover Range Rover
HPLA-12K532-PJGHY32-14C204-PAELand Rover Range Rover Sport
HY32-12K532-PCE10SW017947Land Rover Discovery

Bosch EDC17CP55 original files

The Bosch EDC17CP55 unit page