Original file

Land Rover Velar Bosch EDC17CP55 K8A2-12K532-PYG / 10SW034669

An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Velar, hardware number K8A2-12K532-PYG and software number 10SW034669, 4,288.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Velar3.0 diesel 279PS
Control unit
Bosch EDC17CP55
Read type
Full read (boot area included)
File
4,288.02 KB · Flash
Hardware number
K8A2-12K532-PYG
Software number
10SW034669
Bosch part / software
10SW047322
Software / calibration
K8A2-12B684-PAA

Technical data

Vehicle
BrandLand Rover
Car modelVelar
Engine3.0 diesel 279PS
Power279.0PS / 205.2kW
Control unit
Control unitBosch EDC17CP55
ECU makerBosch
Hardware numberK8A2-12K532-PYG
Software number10SW034669
File
File typeOriginal flash read
File size4,288.02 KB (4,390,928 bytes)
File key556356073d816341
Identification read from the file
ECU nameEDC17CP55
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW047322Offset in the file: 0x02001A
Software / calibrationK8A2-12B684-PAAOffset in the file: 0x00FD00
Bosch project identifier (EPK)39/1/EDC17CP55/190/P1567//P1567_Y475///Offset in the file: 0x042EF0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K8A2-12K532-PYG and software number 10SW034669. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP55

HardwareSoftwareVehicles
JY32-12K532-PJE10SW043398Land Rover
JY32-12K532-PJEJPLA-14C204-PADLand Rover Discovery
JY32-12K532-PJGJPLA-14C204-PADLand Rover Range Rover Sport
K8A2-12K532-PYEK8A2-12K532-PYELand Rover Range Rover Velar, Land Rover Velar
K8A2-12K532-PYG10SW047322Land Rover Velar
K8A2-12K532-PYJ10SW060577Land Rover Star Vein, Land Rover Velar
KK52-12K532-PXE10SW034669Land Rover Range Rover
KK52-12K532-PXEKK52-12K532-PXELand Rover Range Rover Sport

Bosch EDC17CP55 original files

The Bosch EDC17CP55 unit page