Original file
Land Rover Range Rover Bosch EDC17CP55 KPLA-12K532-NYK / 10SW034716
An original (stock) flash read of the Bosch EDC17CP55 control unit, fitted in Land Rover Range Rover, hardware number KPLA-12K532-NYK and software number 10SW034716, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover4.4
- Control unit
- Bosch EDC17CP55
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- KPLA-12K532-NYK
- Software number
- 10SW034716
- Bosch part / software
- 10SW074560
- Software / calibration
- KK62-12B684-NAA
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover |
| Engine | 4.4 |
| Control unit | Bosch EDC17CP55 |
|---|---|
| ECU maker | Bosch |
| Hardware number | KPLA-12K532-NYK |
| Software number | 10SW034716 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | L533CC0 |
| File key | 7674dc26adc53119 |
| ECU name | EDC17CP55 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW074560 | Offset in the file: 0x02001A |
| Software / calibration | KK62-12B684-NAA | Offset in the file: 0x00FD00 |
| Bosch project identifier (EPK) | 39/1/EDC17CP55/190/P1567//P1567_Y475/// | Offset in the file: 0x042EF0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number KPLA-12K532-NYK and software number 10SW034716. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP55
| Hardware | Software | Vehicles |
|---|---|---|
| KK83-12K532-PYG | 10SW047313 | Jaguar F-Pace |
| KPLA-12K532-NYF | KK62-12B684-NAA | Land Rover Range Rover 4.4 SDV8 |
| KPLA-12K532-NYF | KPLA-12K532-NYF | Land Rover Range Rover |
| KPLA-12K532-NYG | KPLA-12K532-NYG | Land Rover Range Rover |
| KX63-12K532-PYF | KX63-12K532-PYF | Jaguar XF |
| KY32-12K532-PFC | KY32-12K532-PFC | Land Rover Discovery |
| KY32-12K532-PYE | 10SW038796 | Land Rover Discovery |
| KY32-12K532-PYF | 10SW030810 | Land Rover Discovery |