Original file

Mercedes-Benz CLS350 Bosch EDC17CP57 0009040200 / 058804

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz CLS350, hardware number 0009040200 and software number 058804, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS350OM642 · 256.0PS / 188.3kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0009040200
Software number
058804
Bosch part / software
10SW058804
Software / calibration
6429023703

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS350
EngineOM642
FuelDiesel
Displacement3.0
Power256.0PS / 188.3kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0009040200
Software number058804
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5793e7fe7d8f3ca8
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW058804Offset in the file: 0x02001A
Software / calibration6429023703Offset in the file: 0x07BD1D
Data set number6429030616Offset in the file: 0x07BD28
Boot software0009040200Offset in the file: 0x07BD12
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DEB0__CV185100///Offset in the file: 0x021080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0009040200 and software number 058804. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
0009040200054403Mercedes-Benz CLS
0009040200054411Mercedes-Benz E350
0009040200058602Mercedes-Benz E350 CDI
0009040200058606Mercedes-Benz E350
00090402001037524982Mercedes-Benz GLE 3.0 CDI V6, Mercedes-Benz S, Mercedes-Benz CLS350
00090402001037552808Mercedes-Benz E300 3.0 CDI V6
000904020010SW010461Mercedes-Benz CLS
000904020010SW054397Mercedes-Benz CLS350

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page