Original file

Mercedes-Benz E350 Bosch EDC17CP57 0009040200 / 10SW058609

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number 0009040200 and software number 10SW058609, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3503.0 diesel · 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
0009040200
Software number
10SW058609
Software / calibration
6429026603

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Engine3.0 diesel
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0009040200
Software number10SW058609
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File keydf4ba4949ea9714c
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW058609Offset in the file: 0x00001A
Software / calibration6429026603Offset in the file: 0x061509
Data set number6429031516Offset in the file: 0x061514
Boot software0009040200Offset in the file: 0x0614FE
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_GHB0__CV192300///Offset in the file: 0x001140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0009040200 and software number 10SW058609. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
000904020010SW054417Mercedes-Benz E350
000904020010SW058602Mercedes-Benz E350
000904020010SW058607P695GHB0Mercedes-Benz E350
000904020010SW058608Mercedes-Benz E
00090402006429010700 - 6429026703 - 6429034114Mercedes-Benz S350 3.0 CDI V6
00090402006429012300Mercedes-Benz CLS350, Mercedes-Benz E350
00090402006429023803 - 6429039314Mercedes-Benz E350 3.0 CDI V6
00090402006429025502 - 6429037210Mercedes-Benz CLS350 3.0 CDI V6

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page