Original file

Mercedes-Benz ML250 Bosch EDC17CP57 0281019167 / 1037540165

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz ML250, hardware number 0281019167 and software number 1037540165, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML250OM651 · 204.0PS / 150.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019167
Software number
1037540165
Software / calibration
6519025001

Technical data

Vehicle
BrandMercedes-Benz
Car modelML250
EngineOM651
FuelDiesel
Displacement2.1
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0281019167
Software number1037540165
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keybc19f07bc2741c34
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software1037540165Offset in the file: 0x02001A
Software / calibration6519025001Offset in the file: 0x082703
Data set number6519031231Offset in the file: 0x08270E
Boot software6519040401Offset in the file: 0x0826F8
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDG0__CV124500///Offset in the file: 0x020BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019167 and software number 1037540165. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
00090402006429025502 - 6429037210Mercedes-Benz CLS350 3.0 CDI V6
00090402006429026603 - 6429012300Mercedes-Benz E350 3.0 CDI V6
002011000010SW017688Mercedes-Benz Sprinter, Mercedes-Benz C55
02651903731037524978Mercedes-Benz Sprinter
02810194161037535409Mercedes-Benz E350
028101941610SW008658Mercedes-Benz E350
028101941610SW010459Mercedes-Benz E350
02810197311037554178Mercedes-Benz GLE

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page