Original file

Mercedes-Benz E350 Bosch EDC17CP57 0281019416 / 10SW010459

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number 0281019416 and software number 10SW010459, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3503.0 diesel · 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019416
Software number
10SW010459
Software / calibration
6429025402

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Engine3.0 diesel
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0281019416
Software number10SW010459
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9adbb5fbb8b3d150
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW010459Offset in the file: 0x02001A
Software / calibration6429025402Offset in the file: 0x078423
Data set number6429031211Offset in the file: 0x07842E
Boot software0009040200Offset in the file: 0x078418
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDB5__CV152600///Offset in the file: 0x020BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019416 and software number 10SW010459. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
02651903731037524978Mercedes-Benz Sprinter
02810191671037540165Mercedes-Benz ML250
02810194161037535409Mercedes-Benz E350
028101941610SW008658Mercedes-Benz E350
02810197311037554178Mercedes-Benz GLE
02810199291037524978Mercedes-Benz Sprinter
028101992910SW010755Mercedes-Benz Sprinter
0281030556018794Mercedes-Benz GLC

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page