Original file

Mercedes-Benz GLC 220CDI Bosch EDC17CP57 0281030556 / 10SW008736

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC 220CDI, hardware number 0281030556 and software number 10SW008736, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC 220CDI2.2 diesel · 163.0PS / 119.9kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281030556
Software number
10SW008736
Software / calibration
6519022302

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC 220CDI
Engine2.2 diesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0281030556
Software number10SW008736
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key19a97287f33a12d9
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW008736Offset in the file: 0x02001A
Software / calibration6519022302Offset in the file: 0x087017
Data set number6519037346Offset in the file: 0x087022
Boot software6519040401Offset in the file: 0x08700C
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HDY1__CV150200///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281030556 and software number 10SW008736. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
0281030556018795Mercedes-Benz GLC
0281030556026009Mercedes-Benz GLC
02810305561037524978Mercedes-Benz GLC 250D 2017y
028103055610SW001374Mercedes-Benz GLC
028103055610SW008738Mercedes-Benz GLC
028103055610SW014676Mercedes-Benz GLC 220CDI
02810311831037544944Mercedes-Benz CLS350
02810311831037552810Mercedes-Benz E350

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page