Original file

Mercedes-Benz Sprinter Bosch EDC17CP57 0281034413 / 017688

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz Sprinter, hardware number 0281034413 and software number 017688, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinterdiesel
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281034413
Software number
017688
Bosch part / software
10SW040854
Software / calibration
6429022003

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Enginediesel
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0281034413
Software number017688
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key16bcd229e71d5e04
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW040854Offset in the file: 0x02001A
Software / calibration6429022003Offset in the file: 0x02022F
Data set number6429030713Offset in the file: 0x283B46
Boot software6429040500Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1643//P_1643_47A1__CV182000///Offset in the file: 0x05BCC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281034413 and software number 017688. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
028103118410SW013263Mercedes-Benz GLE
028103118410SW013266Mercedes-Benz GLS350
028103118410SW013298Mercedes-Benz GLE
028103161210SW026753Mercedes-Benz GLC
034946164310SW034946Mercedes-Benz Sprinter
034946164310SW034946164344A0Mercedes-Benz Sprinter
0370011652017475Mercedes-Benz X350
039119165210SW039119165252Q0Mercedes-Benz X-classe

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page