Original file

Mercedes-Benz X350 Bosch EDC17CP57 0370011652 / 017475

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz X350, hardware number 0370011652 and software number 017475, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz X3503.0 diesel · 256.0PS / 188.3kW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0370011652
Software number
017475
Bosch part / software
10SW037001
Software / calibration
6429024902

Technical data

Vehicle
BrandMercedes-Benz
Car modelX350
Engine3.0 diesel
Power256.0PS / 188.3kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0370011652
Software number017475
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2d8bf9e2e4bc13d3
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW037001Offset in the file: 0x02001A
Software / calibration6429024902Offset in the file: 0x02022F
Data set number6429032913Offset in the file: 0x27EA28
Boot software6429040800Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1652//P_1652_52Q0__CV181300///Offset in the file: 0x061404

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0370011652 and software number 017475. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
028103161210SW026753Mercedes-Benz GLC
0281034413017688Mercedes-Benz Sprinter
034946164310SW034946Mercedes-Benz Sprinter
034946164310SW034946164344A0Mercedes-Benz Sprinter
039119165210SW039119165252Q0Mercedes-Benz X-classe
039121165210SW039121Mercedes-Benz X350 SIMON !
0408541643017688Mercedes-Benz Sprinter
040854164310SW017688Mercedes-Benz Sprinter

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page