Original file

Mercedes-Benz X350 SIMON ! Bosch EDC17CP57 0391211652 / 10SW039121

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz X350 SIMON !, hardware number 0391211652 and software number 10SW039121, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz X350 SIMON !OM642
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
0391211652
Software number
10SW039121
Software / calibration
6429024902

Technical data

Vehicle
BrandMercedes-Benz
Car modelX350 SIMON !
EngineOM642
FuelDiesel
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0391211652
Software number10SW039121
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyaa5b248ea5d624cc
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW039121Offset in the file: 0x22001A
Software / calibration6429024902Offset in the file: 0x27EA1D
Data set number6429033013Offset in the file: 0x27EA28
Boot software6429040800Offset in the file: 0x27EA12
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1652//P_1652_52Q0__CV181300///Offset in the file: 0x221140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0391211652 and software number 10SW039121. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
034946164310SW034946Mercedes-Benz Sprinter
034946164310SW034946164344A0Mercedes-Benz Sprinter
0370011652017475Mercedes-Benz X350
039119165210SW039119165252Q0Mercedes-Benz X-classe
0408541643017688Mercedes-Benz Sprinter
040854164310SW017688Mercedes-Benz Sprinter
043555164310SW043555164347A1Mercedes-Benz Sprinter
048838165210SW048838165253Q0Mercedes-Benz X350CDI, Mercedes-Benz X-classe

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page