Original file

Mercedes-Benz X350CDI Bosch EDC17CP57 0488381652 / 10SW048838165253Q0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz X350CDI, hardware number 0488381652 and software number 10SW048838165253Q0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz X350CDI3.0 diesel · 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0488381652
Software number
10SW048838165253Q0
Bosch part / software
10SW048838
Software / calibration
6429026503

Technical data

Vehicle
BrandMercedes-Benz
Car modelX350CDI
Engine3.0 diesel
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0488381652
Software number10SW048838165253Q0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye9c918ea4bca54c8
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW048838Offset in the file: 0x02001A
Software / calibration6429026503Offset in the file: 0x07E9CD
Data set number6429034714Offset in the file: 0x07E9D8
Boot software6429040800Offset in the file: 0x07E9C2
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1652//P_1652_53Q0__CV185000///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0488381652 and software number 10SW048838165253Q0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz X-classeFlash2,048.00 KB€15Add to cart

All reads of 0488381652 / 10SW048838165253Q0

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
039121165210SW039121Mercedes-Benz X350 SIMON !
0408541643017688Mercedes-Benz Sprinter
040854164310SW017688Mercedes-Benz Sprinter
043555164310SW043555164347A1Mercedes-Benz Sprinter
054975164310SW054975164347A1Mercedes-Benz Sprinter
10SW001097P695HDB11037524982Mercedes-Benz G350 350CDI
10SW014677P695HDY11037524978Mercedes-Benz GLC
10SW018794P695HFY01037524978Mercedes-Benz GLC

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page