Original file

Mercedes-Benz Sprinter Bosch EDC17CP57 1037555926

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz Sprinter, software number 1037555926, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.1 diesel 162PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Software number
1037555926
Software / calibration
6519029401

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.1 diesel 162PS
Power162.4PS / 119.4kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Software number1037555926
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfdb2c81b2f840337
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software1037555926Offset in the file: 0x22001A
Software / calibration6519029401Offset in the file: 0x283D2D
Data set number6519032732Offset in the file: 0x283D38
Boot software6519040401Offset in the file: 0x283D22
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_EJG1__CV150500///Offset in the file: 0x221080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037555926. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
1037524978Mercedes-Benz Sprinter, Mercedes-Benz Sprinter216/316
1037524982Mercedes-Benz GLE
1037544915Mercedes-Benz Sprinter
10SW001881Mercedes-Benz
10SW005980Mercedes-Benz Sprinter
10SW010755Mercedes-Benz Sprinter
10SW011941Mercedes-Benz Sprinter
10SW017688Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page