Original file

Mercedes-Benz G350 350CDI Bosch EDC17CP57 10SW001097P695HDB1 / 1037524982

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz G350 350CDI, hardware number 10SW001097P695HDB1 and software number 1037524982, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz G350 350CDIdiesel 245.0PS / 180.2kW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
10SW001097P695HDB1
Software number
1037524982
Bosch part / software
10SW001097
Software / calibration
6429024002

Technical data

Vehicle
BrandMercedes-Benz
Car modelG350 350CDI
Enginediesel 245.0PS / 180.2kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number10SW001097P695HDB1
Software number1037524982
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyfdefcab8de8ea55e
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW001097Offset in the file: 0x02001A
Software / calibration6429024002Offset in the file: 0x02022F
Data set number6429034110Offset in the file: 0x27D640
Boot software0009040200Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HDB1__CV151500///Offset in the file: 0x065054

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW001097P695HDB1 and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
040854164310SW017688Mercedes-Benz Sprinter
043555164310SW043555164347A1Mercedes-Benz Sprinter
048838165210SW048838165253Q0Mercedes-Benz X350CDI, Mercedes-Benz X-classe
054975164310SW054975164347A1Mercedes-Benz Sprinter
10SW014677P695HDY11037524978Mercedes-Benz GLC
10SW018794P695HFY01037524978Mercedes-Benz GLC
10SW038678P695HGY01037524978Mercedes-Benz GLC
10SW046752P695HGY06519014001Mercedes-Benz GLC250

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page