Original file

Mercedes-Benz Sprinter Bosch EDC17CP57 10SW011941

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz Sprinter, software number 10SW011941, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.2 diesel 80KW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW011941
Software / calibration
6469021701

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.2 diesel 80KW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Software number10SW011941
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameMercedes Sprinter 2.2 CDI EDC17CP57
File keyce814593d880203e
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW011941Offset in the file: 0x02001A
Software / calibration6469021701Offset in the file: 0x02022F
Data set number6469030900Offset in the file: 0x274A96
Boot software6469040300Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1498//P_1498_40T0__CV151700///Offset in the file: 0x055460

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW011941. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
1037555926Mercedes-Benz Sprinter
10SW001881Mercedes-Benz
10SW005980Mercedes-Benz Sprinter
10SW010755Mercedes-Benz Sprinter
10SW017688Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519
10SW043555Mercedes-Benz Sprinter, Mercedes-Benz Sprinter210/310/510
10SW043556Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
10SW054975Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page