Original file

Mercedes-Benz GLC250 Bosch EDC17CP57 10SW046752P695HGY0 / 6519014001

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC250, hardware number 10SW046752P695HGY0 and software number 6519014001, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC250OM651 · 204.0PS / 150.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
10SW046752P695HGY0
Software number
6519014001
Bosch part / software
10SW046752
Software / calibration
6519021503

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC250
EngineOM651
FuelDiesel
Displacement2.1
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number10SW046752P695HGY0
Software number6519014001
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key76bddd49733042b8
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW046752Offset in the file: 0x02001A
Software / calibration6519021503Offset in the file: 0x088373
Data set number6519035057Offset in the file: 0x08837E
Boot software6519040401Offset in the file: 0x088368
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HGY0__CV181700///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW046752P695HGY0 and software number 6519014001. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
10SW001097P695HDB11037524982Mercedes-Benz G350 350CDI
10SW014677P695HDY11037524978Mercedes-Benz GLC
10SW018794P695HFY01037524978Mercedes-Benz GLC
10SW038678P695HGY01037524978Mercedes-Benz GLC
10SW066899P695DDGE066899Mercedes-Benz ML250
551906P695G1037524982Mercedes-Benz CLS350
551907P695G1037551907Mercedes-Benz CLS350
64290107001037524982Mercedes-Benz S 350 CDI

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page