Original file

Mercedes-Benz Sprinter Bosch EDC17CP57 10SW054976

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz Sprinter, software number 10SW054976, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter3.0 diesel 190PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW054976
Software / calibration
6429022003

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine3.0 diesel 190PS
Power190PS / 139.7kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Software number10SW054976
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2ca380cc86078786
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW054976Offset in the file: 0x02001A
Software / calibration6429022003Offset in the file: 0x083B3B
Data set number6429034915Offset in the file: 0x083B46
Boot software6429040500Offset in the file: 0x083B30
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1643//P_1643_47A1__CV182000///Offset in the file: 0x021538

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW054976. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SprinterFlash4,096.00 KB€15Add to cart

All reads of 10SW054976

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
10SW017688Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519
10SW043555Mercedes-Benz Sprinter, Mercedes-Benz Sprinter210/310/510
10SW043556Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
10SW054975Mercedes-Benz Sprinter, Mercedes-Benz Sprinter219/319/419/519
10SW059814Mercedes-Benz
10SW062306Mercedes-Benz
10SW064001Mercedes-Benz
10SW072734Mercedes-Benz Sprinter

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page