Original file

Mercedes-Benz CLS350 Bosch EDC17CP57 551906P695G / 1037524982

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz CLS350, hardware number 551906P695G and software number 1037524982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS3503.0 diesel · 258.3PS / 190.0kW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
551906P695G
Software number
1037524982
Bosch part / software
1037551889
Software / calibration
6429023602

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS350
Engine3.0 diesel
Power258.3PS / 190.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number551906P695G
Software number1037524982
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key25356593ff9e24a1
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037551889Offset in the file: 0x02001A
Software / calibration6429023602Offset in the file: 0x02022F
Data set number6429034608Offset in the file: 0x27FFBE
Boot software0009040200Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_GDB1__CV143700///Offset in the file: 0x064384

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 551906P695G and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
10SW018794P695HFY01037524978Mercedes-Benz GLC
10SW038678P695HGY01037524978Mercedes-Benz GLC
10SW046752P695HGY06519014001Mercedes-Benz GLC250
10SW066899P695DDGE066899Mercedes-Benz ML250
551907P695G1037551907Mercedes-Benz CLS350
64290107001037524982Mercedes-Benz S 350 CDI
64290116006429028603Mercedes-Benz E350 350CDI
64290123006429026603Mercedes-Benz E350 3.0d

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page