Original file

Mercedes-Benz E350 350CDI Bosch EDC17CP57 6429011600 / 6429028603

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350 350CDI, hardware number 6429011600 and software number 6429028603, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E350 350CDIdiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429011600
Software number
6429028603
Bosch part / software
10SW062570

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350 350CDI
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429011600
Software number6429028603
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6b63d5115099bcc2
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW062570Offset in the file: 0x02001A
Software / calibration6429028603Offset in the file: 0x07BC95
Data set number6429039215Offset in the file: 0x07BCA0
Boot software0009040200Offset in the file: 0x07BC8A
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DGB0__CV195000///Offset in the file: 0x021080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429011600 and software number 6429028603. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
10SW066899P695DDGE066899Mercedes-Benz ML250
551906P695G1037524982Mercedes-Benz CLS350
551907P695G1037551907Mercedes-Benz CLS350
64290107001037524982Mercedes-Benz S 350 CDI
64290123006429026603Mercedes-Benz E350 3.0d
64290209021037524982Mercedes-Benz E 350 CDI
64290209021037538071Mercedes-Benz E Coupe 350 CDI
64290219021037524982Mercedes-Benz S 350 CDI

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page