Original file

Mercedes-Benz E350 3.0d Bosch EDC17CP57 6429012300 / 6429026603

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350 3.0d, hardware number 6429012300 and software number 6429026603, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E350 3.0d3.0 diesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429012300
Software number
6429026603
Bosch part / software
10SW054415

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350 3.0d
Engine3.0 diesel 258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429012300
Software number6429026603
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key72df0cb69f1aed1c
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW054415Offset in the file: 0x02001A
Software / calibration6429026603Offset in the file: 0x081509
Data set number6429039514Offset in the file: 0x081514
Boot software0009040200Offset in the file: 0x0814FE
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_GHB0__CV192300///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429012300 and software number 6429026603. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
551906P695G1037524982Mercedes-Benz CLS350
551907P695G1037551907Mercedes-Benz CLS350
64290107001037524982Mercedes-Benz S 350 CDI
64290116006429028603Mercedes-Benz E350 350CDI
64290209021037524982Mercedes-Benz E 350 CDI
64290209021037538071Mercedes-Benz E Coupe 350 CDI
64290219021037524982Mercedes-Benz S 350 CDI
64290222021037524982Mercedes-Benz S 350d

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page