Original file

Mercedes-Benz S 350 D Bosch EDC17CP57 6429022202 / 10SW016190 P695HDH1

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz S 350 D, hardware number 6429022202 and software number 10SW016190 P695HDH1, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S 350 Ddiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6429022202
Software number
10SW016190 P695HDH1
Bosch part / software
10SW016190

Technical data

Vehicle
BrandMercedes-Benz
Car modelS 350 D
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429022202
Software number10SW016190 P695HDH1
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd7c047a1a5f596c8
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW016190Offset in the file: 0x02001A
Software / calibration6429022202Offset in the file: 0x07D741
Data set number6429037911Offset in the file: 0x07D74C
Boot software0009040200Offset in the file: 0x07D736
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HDH1__CV151800///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429022202 and software number 10SW016190 P695HDH1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
64290209021037524982Mercedes-Benz E 350 CDI
64290209021037538071Mercedes-Benz E Coupe 350 CDI
64290219021037524982Mercedes-Benz S 350 CDI
64290222021037524982Mercedes-Benz S 350d
642902320310SW046983 P695HJB0Mercedes-Benz GLE 350d
64290232036429033714Mercedes-Benz GLE350 3.0 CDI
64290233021037553768Mercedes-Benz GKE 350d, Mercedes-Benz GLE 350d
64290236021037551903Mercedes-Benz E 350 CDI

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page