Original file

Mercedes-Benz GLE350 3.0 CDI Bosch EDC17CP57 6429023203 / 6429033714

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLE350 3.0 CDI, hardware number 6429023203 and software number 6429033714, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE350 3.0 CDI3.0 diesel 258.1PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
6429023203
Software number
6429033714
Bosch part / software
10SW046986

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE350 3.0 CDI
Engine3.0 diesel 258.1PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429023203
Software number6429033714
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key6cdd356dc9bf6f27
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
Bosch part / software10SW046986Offset in the file: 0x0A001A
Software / calibration6429023203Offset in the file: 0x01EFA7
Data set number6429033714Offset in the file: 0x01EFB2
Boot software0009040200Offset in the file: 0x01EF9C
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HJB0__CV184100///Offset in the file: 0x0A1140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429023203 and software number 6429033714. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
64290219021037524982Mercedes-Benz S 350 CDI
64290222021037524982Mercedes-Benz S 350d
642902220210SW016190 P695HDH1Mercedes-Benz S 350 D
642902320310SW046983 P695HJB0Mercedes-Benz GLE 350d
64290233021037553768Mercedes-Benz GKE 350d, Mercedes-Benz GLE 350d
64290236021037551903Mercedes-Benz E 350 CDI
64290236021037551905Mercedes-Benz E 350 d
64290236021037552039Mercedes-Benz E 350 d

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page