Original file

Mercedes-Benz E 350 CDI Bosch EDC17CP57 6429025502 / 10SW004299 P695GDB2

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E 350 CDI, hardware number 6429025502 and software number 10SW004299 P695GDB2, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 350 CDIdiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6429025502
Software number
10SW004299 P695GDB2
Bosch part / software
10SW004299

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 350 CDI
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429025502
Software number10SW004299 P695GDB2
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybc6338c4e15c0f90
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW004299Offset in the file: 0x22001A
Software / calibration6429025502Offset in the file: 0x27FFB3
Data set number6429037109Offset in the file: 0x27FFBE
Boot software0009040200Offset in the file: 0x27FFA8
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_GDB2__CV152500///Offset in the file: 0x221140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429025502 and software number 10SW004299 P695GDB2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
64290248031037524982Mercedes-Benz GLE 350 D
642902540210SW008659 P695DDB5Mercedes-Benz E 350 d
642902540210SW010466 P695DDB5Mercedes-Benz E 350 CDI
64290255021037524982Mercedes-Benz CLS 350 CDI
642902550210SW004509 P695GDB2Mercedes-Benz CLS 350 CDI
642902550210SW006806 P695GDB2Mercedes-Benz E 350 d
642902610210SW013263 P695HDB2Mercedes-Benz GLE 350d
642902610210SW013268 P695HDB2Mercedes-Benz GLE 350 d

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page