Original file

Mercedes-Benz GLC 350 D Bosch EDC17CP57 6429026303 / 10SW069065 P695KKH0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC 350 D, hardware number 6429026303 and software number 10SW069065 P695KKH0, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC 350 Ddiesel 258PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6429026303
Software number
10SW069065 P695KKH0
Bosch part / software
10SW069065

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC 350 D
Enginediesel 258PS
Displacement3.0
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429026303
Software number10SW069065 P695KKH0
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key01077df15afe3930
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW069065Offset in the file: 0x22001A
Software / calibration6429026303Offset in the file: 0x27FD45
Data set number6429032617Offset in the file: 0x27FD50
Boot software0009040200Offset in the file: 0x27FD3A
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_KKH0__CV201200///Offset in the file: 0x221140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429026303 and software number 10SW069065 P695KKH0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
642902550210SW006806 P695GDB2Mercedes-Benz E 350 d
642902610210SW013263 P695HDB2Mercedes-Benz GLE 350d
642902610210SW013268 P695HDB2Mercedes-Benz GLE 350 d
642902610210SW013298 P695HDB2Mercedes-Benz GLE 350 D
642902660310SW054404 P695GHB0Mercedes-Benz CLS 350 CDI
642902660310SW054417 P695GHB0Mercedes-Benz E 350 CDI
642902660310SW058602 P695GHB0Mercedes-Benz E 350 CDI
642902670310SW059217 P695DFH0Mercedes-Benz S 350 D

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page