Original file

Mercedes-Benz E 350 d Bosch EDC17CP57 6429027002 / 10SW022857 P695J4E0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E 350 d, hardware number 6429027002 and software number 10SW022857 P695J4E0, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E 350 ddiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6429027002
Software number
10SW022857 P695J4E0
Bosch part / software
10SW022857

Technical data

Vehicle
BrandMercedes-Benz
Car modelE 350 d
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6429027002
Software number10SW022857 P695J4E0
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9a2d92bef3167869
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW022857Offset in the file: 0x22001A
Software / calibration6429027002Offset in the file: 0x28008D
Data set number6429031712Offset in the file: 0x280098
Boot software0009040200Offset in the file: 0x280082
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_J4E0__CV160900///Offset in the file: 0x221538

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6429027002 and software number 10SW022857 P695J4E0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
642902660310SW054417 P695GHB0Mercedes-Benz E 350 CDI
642902660310SW058602 P695GHB0Mercedes-Benz E 350 CDI
642902670310SW059217 P695DFH0Mercedes-Benz S 350 D
642902670310SW059220 P695DFH0Mercedes-Benz S 350 D
642902860310SW062570 P695DGB0Mercedes-Benz E 350 CDI
642902860310SW062577 P695DGB0Mercedes-Benz E 350 CDI
64290292011037533186Mercedes-Benz E 350 CDI
64290292011037533904Mercedes-Benz E 350 CDI

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page