Original file

Mercedes-Benz GLC Bosch EDC17CP57 6519014001 / 6519040401

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC, hardware number 6519014001 and software number 6519040401, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLCOM651 · 170.0PS / 125.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519014001
Software number
6519040401
Bosch part / software
10SW038698
Software / calibration
6519021503

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC
EngineOM651
FuelDiesel
Displacement2.1
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519014001
Software number6519040401
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9e3d2622b45a833a
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW038698Offset in the file: 0x02001A
Software / calibration6519021503Offset in the file: 0x088373
Data set number6519031456Offset in the file: 0x08837E
Boot software6519040401Offset in the file: 0x088368
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HGY0__CV181700///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519014001 and software number 6519040401. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
64290408006429012500 - 6429024902 - 6429032913Mercedes-Benz X350 350 CDI
6519012401P695DDGCMercedes-Benz W166 250 CDI S&S (2.1)
65190140011037524978Mercedes-Benz GLC250 2.2d
65190140016519020102Mercedes-Benz C300de 2.2d
65190167011037540165Mercedes-Benz ML250 2.1 BlueTEC R4
65190167016519040401Mercedes-Benz ML
65190171016519020104Mercedes-Benz ML250
65190201021037524978Mercedes-Benz C 300 DE

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page