Original file

Mercedes-Benz ML250 Bosch EDC17CP57 6519017101 / 6519020104

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz ML250, hardware number 6519017101 and software number 6519020104, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML250OM651 · 204.0PS / 150.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519017101
Software number
6519020104
Bosch part / software
10SW066899

Technical data

Vehicle
BrandMercedes-Benz
Car modelML250
EngineOM651
FuelDiesel
Displacement2.2
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519017101
Software number6519020104
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4af99857b5963747
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW066899Offset in the file: 0x02001A
Software / calibration6519020104Offset in the file: 0x086773
Data set number6519035970Offset in the file: 0x08677E
Boot software6519040401Offset in the file: 0x086768
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDGE__CV201600///Offset in the file: 0x021080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519017101 and software number 6519020104. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
65190140016519020102Mercedes-Benz C300de 2.2d
65190140016519040401Mercedes-Benz GLC
65190167011037540165Mercedes-Benz ML250 2.1 BlueTEC R4
65190167016519040401Mercedes-Benz ML
65190201021037524978Mercedes-Benz C 300 DE
651902010210SW008014 P695FEP0Mercedes-Benz C 300d Hybrid
651902010210SW013708 P695FEP0Mercedes-Benz C 300 D Hybrid
651902030410SW080638 P695HIY0Mercedes-Benz GLC 250 D

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page