Original file
Mercedes-Benz C 300d Hybrid Bosch EDC17CP57 6519020102 / 10SW008014 P695FEP0
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz C 300d Hybrid, hardware number 6519020102 and software number 10SW008014 P695FEP0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz C 300d Hybriddiesel 204 (231)PS / 150.0kW
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 6519020102
- Software number
- 10SW008014 P695FEP0
- Bosch part / software
- 10SW008014
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | C 300d Hybrid |
| Engine | diesel 204 (231)PS / 150.0kW |
| Displacement | 2.2 |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 6519020102 |
| Software number | 10SW008014 P695FEP0 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | a9cfa88be2c2774c |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW008014 | Offset in the file: 0x02001A |
| Software / calibration | 6519020102 | Offset in the file: 0x08E4B5 |
| Data set number | 6519035746 | Offset in the file: 0x08E4C0 |
| Boot software | 6519040401 | Offset in the file: 0x08E4AA |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_FEP0__CV141200/// | Offset in the file: 0x02D448 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 6519020102 and software number 10SW008014 P695FEP0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| 6519016701 | 1037540165 | Mercedes-Benz ML250 2.1 BlueTEC R4 |
| 6519016701 | 6519040401 | Mercedes-Benz ML |
| 6519017101 | 6519020104 | Mercedes-Benz ML250 |
| 6519020102 | 1037524978 | Mercedes-Benz C 300 DE |
| 6519020102 | 10SW013708 P695FEP0 | Mercedes-Benz C 300 D Hybrid |
| 6519020304 | 10SW080638 P695HIY0 | Mercedes-Benz GLC 250 D |
| 6519021503 | 10SW038691 P695HGY0 | Mercedes-Benz GLC 220d |
| 6519021503 | 10SW038701 P695HGY0 | Mercedes-Benz GLC 250 d |