Original file

Mercedes-Benz C 300 D Hybrid Bosch EDC17CP57 6519020102 / 10SW013708 P695FEP0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz C 300 D Hybrid, hardware number 6519020102 and software number 10SW013708 P695FEP0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C 300 D Hybriddiesel 231.0PS / 169.9kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519020102
Software number
10SW013708 P695FEP0
Bosch part / software
10SW013708

Technical data

Vehicle
BrandMercedes-Benz
Car modelC 300 D Hybrid
Enginediesel 231.0PS / 169.9kW
Displacement2.1
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519020102
Software number10SW013708 P695FEP0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key213d206bd98d3381
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW013708Offset in the file: 0x02001A
Software / calibration6519020102Offset in the file: 0x08E4B5
Data set number6519039448Offset in the file: 0x08E4C0
Boot software6519040401Offset in the file: 0x08E4AA
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_FEP0__CV141200///Offset in the file: 0x02D448

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519020102 and software number 10SW013708 P695FEP0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
65190167016519040401Mercedes-Benz ML
65190171016519020104Mercedes-Benz ML250
65190201021037524978Mercedes-Benz C 300 DE
651902010210SW008014 P695FEP0Mercedes-Benz C 300d Hybrid
651902030410SW080638 P695HIY0Mercedes-Benz GLC 250 D
651902150310SW038691 P695HGY0Mercedes-Benz GLC 220d
651902150310SW038701 P695HGY0Mercedes-Benz GLC 250 d
651902150310SW046751 P695HGY0Mercedes-Benz GLC 220 CDI

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page