Original file

Mercedes-Benz GLC 250 D Bosch EDC17CP57 6519020304 / 10SW080638 P695HIY0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC 250 D, hardware number 6519020304 and software number 10SW080638 P695HIY0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC 250 Ddiesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519020304
Software number
10SW080638 P695HIY0
Bosch part / software
10SW080638

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC 250 D
Enginediesel 204.0PS / 150.0kW
Displacement2.1
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519020304
Software number10SW080638 P695HIY0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye75fc3e84b97b1c5
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW080638Offset in the file: 0x02001A
Software / calibration6519020304Offset in the file: 0x087A05
Data set number6519035175Offset in the file: 0x087A10
Boot software6519040401Offset in the file: 0x0879FA
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HIY0__CV202600///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519020304 and software number 10SW080638 P695HIY0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
65190171016519020104Mercedes-Benz ML250
65190201021037524978Mercedes-Benz C 300 DE
651902010210SW008014 P695FEP0Mercedes-Benz C 300d Hybrid
651902010210SW013708 P695FEP0Mercedes-Benz C 300 D Hybrid
651902150310SW038691 P695HGY0Mercedes-Benz GLC 220d
651902150310SW038701 P695HGY0Mercedes-Benz GLC 250 d
651902150310SW046751 P695HGY0Mercedes-Benz GLC 220 CDI
651902150310SW046752 P695HGY0Mercedes-Benz GLC 250 D

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page