Original file

Mercedes-Benz GLC 220d Bosch EDC17CP57 6519027202 / 10SW018795 P695HFY0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC 220d, hardware number 6519027202 and software number 10SW018795 P695HFY0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC 220ddiesel 170.0PS / 125.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519027202
Software number
10SW018795 P695HFY0
Bosch part / software
10SW018795

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC 220d
Enginediesel 170.0PS / 125.0kW
Displacement2.1
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519027202
Software number10SW018795 P695HFY0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key466e33f9afe0aeeb
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW018795Offset in the file: 0x02001A
Software / calibration6519027202Offset in the file: 0x088367
Data set number6519033250Offset in the file: 0x088372
Boot software6519040401Offset in the file: 0x08835C
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HFY0__CV164700///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519027202 and software number 10SW018795 P695HFY0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
651902150310SW046752 P695HGY0Mercedes-Benz GLC 250 D
651902230210SW011869 P695HDY1Mercedes-Benz GLC 200d
65190223024P695HDY1Mercedes-Benz GLC
65190272021037524978Mercedes-Benz GLC 220 d
651902850310SW063085 P695FGP0Mercedes-Benz C 300d Hybrid
651903165610SW038701 P695HGY0Mercedes-Benz GLC 250d
65190404011037524978Mercedes-Benz GLC220 2.2 CDI R4
65190404011037550133Mercedes-Benz ML250 2.2 CDI R4

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page