Original file

Mercedes-Benz GLC 250d Bosch EDC17CP57 6519031656 / 10SW038701 P695HGY0

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC 250d, hardware number 6519031656 and software number 10SW038701 P695HGY0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC 250ddiesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519031656
Software number
10SW038701 P695HGY0
Bosch part / software
10SW038701
Software / calibration
6519021503

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC 250d
Enginediesel 204.0PS / 150.0kW
Displacement2.1
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519031656
Software number10SW038701 P695HGY0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyea6174f635c1dead
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW038701Offset in the file: 0x02001A
Software / calibration6519021503Offset in the file: 0x088373
Data set number6519031656Offset in the file: 0x08837E
Boot software6519040401Offset in the file: 0x088368
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HGY0__CV181700///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519031656 and software number 10SW038701 P695HGY0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
65190223024P695HDY1Mercedes-Benz GLC
65190272021037524978Mercedes-Benz GLC 220 d
651902720210SW018795 P695HFY0Mercedes-Benz GLC 220d
651902850310SW063085 P695FGP0Mercedes-Benz C 300d Hybrid
65190404011037524978Mercedes-Benz GLC220 2.2 CDI R4
65190404011037550133Mercedes-Benz ML250 2.2 CDI R4
65190404016519021503 - 6519031456Mercedes-Benz GLC220 2.2 CDI R4
65190404016519021503 - 6519040401 - 6519031456Mercedes-Benz GLC 2.2 CDI R4

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page