Original file

Mercedes-Benz ML250 2.2 CDI R4 Bosch EDC17CP57 6519040401 / 1037550133

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz ML250 2.2 CDI R4, hardware number 6519040401 and software number 1037550133, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML250 2.2 CDI R42.2 diesel 204.0PS / 150.0kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519040401
Software number
1037550133
Software / calibration
6519021502

Technical data

Vehicle
BrandMercedes-Benz
Car modelML250 2.2 CDI R4
Engine2.2 diesel 204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number6519040401
Software number1037550133
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya1dff86ff3e003cb
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software1037550133Offset in the file: 0x04001A
Software / calibration6519021502Offset in the file: 0x0A2703
Data set number6519033133Offset in the file: 0x0A270E
Boot software6519040401Offset in the file: 0x0A26F8
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDG1__CV143000///Offset in the file: 0x040BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519040401 and software number 1037550133. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
651902720210SW018795 P695HFY0Mercedes-Benz GLC 220d
651902850310SW063085 P695FGP0Mercedes-Benz C 300d Hybrid
651903165610SW038701 P695HGY0Mercedes-Benz GLC 250d
65190404011037524978Mercedes-Benz GLC220 2.2 CDI R4
65190404016519021503 - 6519031456Mercedes-Benz GLC220 2.2 CDI R4
65190404016519021503 - 6519040401 - 6519031456Mercedes-Benz GLC 2.2 CDI R4
90790991010SW017688Mercedes-Benz Sprinter
A65190061011037524978Mercedes-Benz Sprinter

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page