Original file

Mercedes-Benz ML Bosch EDC17CP57 CR43-651-DDGC-166WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-002_ME / 10SW059817

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz ML, hardware number CR43-651-DDGC-166WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-002_ME and software number 10SW059817, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz ML2.2 diesel 204PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
CR43-651-DDGC-166WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-002_ME
Software number
10SW059817
Software / calibration
6519021903

Technical data

Vehicle
BrandMercedes-Benz
Car modelML
Engine2.2 diesel 204PS
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR43-651-DDGC-166WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-002_ME
Software number10SW059817
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File key224de886ffc2194c
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW059817Offset in the file: 0x00001A
Software / calibration6519021903Offset in the file: 0x06671F
Data set number6519036968Offset in the file: 0x06672A
Boot software6519040401Offset in the file: 0x066714
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDGC__CV194400///Offset in the file: 0x001080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR43-651-DDGC-166WA4X-150KW-CH4N-EU6OPS-LL-EF_NOXTT3-002_ME and software number 10SW059817. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page