Original file

Mercedes-Benz C300 CDI Hybrid Bosch EDC17CP57 CR43-651-FEP0-205WA2_MH_AJ15-150KW-CH4N-EU6OPS-LL-EF-NOXTT3 / 10SW004448

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz C300 CDI Hybrid, hardware number CR43-651-FEP0-205WA2_MH_AJ15-150KW-CH4N-EU6OPS-LL-EF-NOXTT3 and software number 10SW004448, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C300 CDI Hybrid2.1 diesel 204PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR43-651-FEP0-205WA2_MH_AJ15-150KW-CH4N-EU6OPS-LL-EF-NOXTT3
Software number
10SW004448
Software / calibration
6519020102

Technical data

Vehicle
BrandMercedes-Benz
Car modelC300 CDI Hybrid
Engine2.1 diesel 204PS
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR43-651-FEP0-205WA2_MH_AJ15-150KW-CH4N-EU6OPS-LL-EF-NOXTT3
Software number10SW004448
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyefd7153bbae9a1b1
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW004448Offset in the file: 0x02001A
Software / calibration6519020102Offset in the file: 0x08E4B5
Data set number6519035041Offset in the file: 0x08E4C0
Boot software6519040401Offset in the file: 0x08E4AA
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_FEP0__CV141200///Offset in the file: 0x02D448

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR43-651-FEP0-205WA2_MH_AJ15-150KW-CH4N-EU6OPS-LL-EF-NOXTT3 and software number 10SW004448. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz C220Flash4,096.00 KB€15Add to cart

All reads of CR43-651-FEP0-205WA2_MH_AJ15-150KW-CH4N-EU6OPS-LL-EF-NOXTT3 / 10SW004448

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page