Original file
Mercedes-Benz GLC Bosch EDC17CP57 CR43-651-HDY1-X253WAX_AJ16_NAG3-125 / 1037524978
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC, hardware number CR43-651-HDY1-X253WAX_AJ16_NAG3-125 and software number 1037524978, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLC2.2 diesel · 170.0PS / 125.0kW
- Control unit
- Bosch EDC17CP57
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR43-651-HDY1-X253WAX_AJ16_NAG3-125
- Software number
- 1037524978
- Bosch part / software
- 1037555188
- Software / calibration
- 6519022302
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLC |
| Engine | 2.2 diesel |
| Power | 170.0PS / 125.0kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR43-651-HDY1-X253WAX_AJ16_NAG3-125 |
| Software number | 1037524978 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 9bcde4554e368cd7 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 1037555188 | Offset in the file: 0x02001A |
| Software / calibration | 6519022302 | Offset in the file: 0x02022F |
| Data set number | 6519037446 | Offset in the file: 0x287022 |
| Boot software | 6519040401 | Offset in the file: 0x00FC4D |
| Internal build string | 001_2.2.00_CFG03 | Offset in the file: 0x00FC24 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_HDY1__CV150200/// | Offset in the file: 0x05A0E0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR43-651-HDY1-X253WAX_AJ16_NAG3-125 and software number 1037524978. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR43-651-HDG1-166WA_AJ16_NAG3-150KW-CH4O-EU6OPS-LL-EF-011_M | 10SW008728 | Mercedes-Benz GLE |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-120KW-CH3OEVO-EU6OPS-LL-EF | 1037524978 | Mercedes-Benz GLC |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-120KW-CH3OEVO-EU6OPS-LL-EF | 10SW013025 | Mercedes-Benz GLC |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-120KW-CH3OEVO-EU6OPS-LL-EF | 10SW014676 | Mercedes-Benz GLC |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-125KW-CH3OEVO-EU4O-LL-EF-01 | 10SW008740 | Mercedes-Benz GLC |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-125KW-CH3OEVO-EU6OPS-LL-EF | 1037524978 | Mercedes-Benz GLC, Mercedes-Benz CLC220, Mercedes-Benz GLA |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-125KW-CH3OEVO-EU6OPS-LL-EF | 10SW008738 | Mercedes-Benz GLC220 |
| CR43-651-HDY1-X253WAX_AJ16_NAG3-125KW-CH3OEVO-EU6OPS-LL-EF | 10SW014677 | Mercedes-Benz GLC |